Description
PASSIVE BI-AMP MONITOR
M15
The Adamson M15 multi-purpose loudspeaker features an extremely low profile, symmetrical pentagon design, with a 50-degree conical waveguide. This unique combination allows any two enclosures to work together in a mirror image monitor configuration.
The M15 is loaded with a single Adamson ND15-L Kevlar Neodymium Driver, marking the launch of Adamson’s Advanced Cone Architecture – This breakthrough technology makes the ND15-L the only 15” driver with zero axial modes in its entire passband, dramatically increasing the linearized mid-range response, while maintaining a rock solid bottom end (impossible to achieve with a 15” paper driver). The top end is covered by a 4” high frequency compression driver, giving it extremely high SPL throughout the bandwidth. The lightweight package (56.5 lbs/25.63 kg) can be equipped with a switchable internal crossover, allowing bi-amped or passive operation.
Frequency Range (+/-3 dB)
|
50 Hz – 18 kHz
|
Nominal Directivity (-6 dB) H x V
|
50° x 50°
|
Maximum Peak SPL**
|
137.8 dB Active, 137.3 dB Passive
|
Components LF
|
ND15-L 15″ Kevlar Neodymium Driver
|
Components HF
|
B&C DE1000 4″ Diaphragm / 1.5″ Exit Compression Driver
|
Nominal Impedance LF
|
8 Ω
|
Nominal Impedance HF
|
8 Ω
|
Nominal Impedance Passive
|
8 Ω
|
Power Handling (AES / Peak) LF
|
500 / 2000 W
|
Power Handling (AES / Peak) HF
|
140 / 560 W
|
Power Handling (AES / Peak) Passive
|
640 / 2560 W
|
Rigging
|
MASS™ Rigging System
|
Connection
|
4x Speakon™ NL4
|
Height Front (mm / in)
|
356 / 14
|
Width (mm / in)
|
724 / 28.5
|
Depth (mm / in)
|
429 / 16.9
|
Weight (kg / lbs)
|
25.4 / 56
|
Supported Processing
|
Lake, XTA
|
