AVIOM AN-16/i

code: 864.AVM.015.TRA

The AN-16/i provides 16 balanced line-level inputs to a Pro16® system.

Features

• Sixteen balanced audio inputs (1/4-in TRS connectors)
• Sixteen balanced Thru connectors (TRS)
• A-Net Out and A-Net Expansion network connections (RJ45)
• Stereo Link switches for each channel pair
• Four-position gain switches (+22, +4, 0, -10dB)
• Signal present and clip LEDs per channel

The AN-16/i provides 16 balanced line-level inputs into a Pro16 system. Audio is converted to digital and transmitted via A-Net, up to 500'/150m over Cat-5e. A dedicated audio thru is available for each input channel, allowing the AN-16/i to be seamlessly inserted into an existing audio signal path.

Placed at a front-of-house or monitor console, the AN-16/i can be used as a head-end for a Pro16 Monitor Mixing System. Audio from the console—any combination of channel inserts, direct outs, submixes, auxes, or groups—is connected to the input channels on the AN-16/i. The A-Net Out on the AN-16/i is connected to the A-Net In of a Pro16 Personal Mixer or A-Net Distributor.

Used in conjunction with the AN-16/o Output Module, the AN-16/i can also be used in a digital snake as an input path for main return signals from front-of- house. The built-in A-Net Expansion jack allows two 16-channel A-Net streams to be combined onto a single cable (32x0 or 16x16), and the AN-16SBR System Bridge can be used to combine up to four 16-channel streams onto a single cable in a variety of bidirectional configurations.

The flexibility and simplicity of the Pro16 Series allows complex audio distribution systems and snakes to be created quickly and cost-effectively.

Audio Inputs	16, balanced line-level, 1/4-inch TRS connector
Inputs	Tip: Audio +; Ring: Audio -; Sleeve: Ground
TRS Thru	Impedance matched output
Analog to Digital Conversion	48kHz sample rate, 24 bit
Frequency Response	4Hz-22kHz
A- Net Output	one Category 5 (RJ45 connector)
A-Net Expansion	one Category 5 (RJ45 connector)
Gain Settings	Four-position switch, -10dBv, 0dBu, +4dBu, and +22dBu
Channel LED Indicators	Signal Present and Clip, per channel
Line Inputs	Impedance: 48k ohms
Metering	LEDs; green: Signal Present, red: Clip; per channel
Stereo Operation	Stereo Link, per channel pair; Two-position switch (Normal, Link)
Maximum Input Level	+22dBu
Input Impedance	17.8k ohm
Freq. Response	4Hz-22kHz +0.2dB/-3dB
THD +N	< 0.003%
Crosstalk	-90dB
Bit Error Rate (BER)	10(-12)
Signal to Noise (unweighted)	90dB typical, A/D to D/A Measured from AN-16/i to AN-16/o Output Module
Digital Outputs	A-Net: 1; A-Net Expansion: 1; RJ45 connector
A-Net Pro16	A-Net Expansion combines two A-Net streams (32 channels of audio) onto one Cat-5e cable; use unshielded Cat-5e UTP (or better) cable
Latency	<0.880 msec (measured from analog input to analog output)
Power Supply	External, DC, universal switching type
Input Voltage	100-240 volts, 50/60Hz, 30VA
Output Voltage	18-24 VDC, 0.5 amp
Plug Size	2 mm
Power	18-24 VDC, 500mA
Dimensions	19" (482.6 mm) wide x 5.75" (146 mm) deep; 1U high
Weight	6.8 lbs. (3.08 kg)
Options	AN-16SBR System Bridge; used to combine up to four A-Net streams for transmission over one Cat-5e cable