AVIOM A-16II

code: 864.AVM.010.MON

The A-16II Personal Mixer allows each performer to create a unique, customized monitor mix on stage or in the studio

Features

• 16-channel stereo mixer with fully adjustable pan per channel
• Sixteen Preset locations for storing custom mixes
• Channel solo, mute, and group functions
• Global trim for reducing all channel volumes
• Intuitive interface with no menus or screens to navigate
• Mounts easily on a mic stand with the optional MT-1 Mic Stand Mount

The A-16II allows individual performers to create custom monitor mixes tailored to their individual needs. Designed for use in live performance or in the studio, the A-16II Personal Mixer gives each performer control over channel volume, grouping, pan, stereo spread, and master volume and tone. Every Personal Mixer in a system can create a unique monitor mix for a performer. Users can save and recall up to sixteen custom mixes as presets in their Personal Mixer.

The stereo output from the A-16II can be used to drive wired or wireless in-the-ear monitors, headphones, powered floor wedges, an amplifier, or spot monitors.

Digital Console Support
The A-16II Personal Mixer is fully compatible with all Pro16® Series products, including Aviom's digital interface card for Yamaha® digital mixing consoles. Support for Aviom monitor mixing is available in the form of console interface cards from an ever- increasing list of digital console manufacturers including Digidesign®, Soundcraft®, Innovason®, etc. Look for the A-Net Active™ logo, and see our Partners page for additional information.

Flexible Connection Options
Mixers can be daisy-chained or connected in parallel using an A-Net Distributor. Parallel connections also allow power to be supplied to the mixers over the Cat-5e cable. As with all Pro16 Series products, Cat-5e cable runs of up to 500 feet (150 meters) are possible between devices, and there is no limit to the number of mixers in a system.

The A-16II Personal Mixer can be connected to a Pro64® network by adding the ASI A-Net Systems Inetrface module.

Audio Output	1/4-inch TRS stereo, headphone or line level
Line/Headphone TRS Output	Tip: Audio Left; Ring: Audio Right;Sleeve: Ground Auto-detects mono plugs
A-Net Input/Output	1 A-Net input, 1 A-Net output; Category 5 (RJ45 connector)
Digital to Analog Conversion	24 bit
Signal to Noise Ratio	(Referenced to 0dB) -103dB
Latency	<0.880 msec (measured from analog input to analog output)
Pro16 A-Net	uses unshielded Cat-5e UTP (or better) cable; maximum 500ft (150m) between devices
Tone Controls	Treble +/-12dB at 9kHz shelving Bass +/-12dB at 160Hz shelving
Maximum Levels (RMS)	Line/Headphone outs: 1.0 watt at 100 ohms
Impedance	Line/Headphone outs: 32 ohms
Power Supply	External, DC, universal switching type
Input Voltage	100-240 volts, 50/60Hz, 30VA
Output Voltage	18-24 VDC, 0.5 amp
Plug Size	2 mm
Dimensions	10.75" (273 mm) wide x 5.6" (142.2 mm) deep; 2.25" (57.5 mm) high
Weight	3.4 lbs. (1.54 kg)
Options	MT-1 Mic Stand Mount (uses 6-32 1/4-inch screws) EB-1 Extension Bracket MT-X Expansion Box (requires MT-1)