Description
The A-16II Personal Mixer allows each performer to create a unique, customized monitor mix on stage or in the studio
Features
-
16-channel stereo mixer with fully adjustable pan per channel
-
Sixteen Preset locations for storing custom mixes
-
Channel solo, mute, and group functions
-
Global trim for reducing all channel volumes
-
Intuitive interface with no menus or screens to navigate
-
Mounts easily on a mic stand with the optional MT-1 Mic Stand Mount
Details
-
- The A-16II allows individual performers to create custom monitor mixes tailored to their individual needs. Designed for use in live performance or in the studio, the A-16II Personal Mixer gives each performer control over channel volume, grouping, pan, stereo spread, and master volume and tone. Every Personal Mixer in a system can create a unique monitor mix for a performer. Users can save and recall up to sixteen custom mixes as presets in their Personal Mixer.
-
- The stereo output from the A-16II can be used to drive wired or wireless in-the-ear monitors, headphones, powered floor wedges, an amplifier, or spot monitors.
Digital Console Support
-
- The A-16II Personal Mixer is fully compatible with all Pro16® Series products, including Aviom’s digital interface card for Yamaha® digital mixing consoles. Support for Aviom monitor mixing is available in the form of console interface cards from an ever- increasing list of digital console manufacturers including Digidesign®, Soundcraft®, Innovason®, etc. Look for the A-Net Active™ logo, and see our Partners page for additional information.
Flexible Connection Options
-
- Mixers can be daisy-chained or connected in parallel using an A-Net Distributor. Parallel connections also allow power to be supplied to the mixers over the Cat-5e cable. As with all Pro16 Series products, Cat-5e cable runs of up to 500 feet (150 meters) are possible between devices, and there is no limit to the number of mixers in a system.
- The A-16II Personal Mixer can be connected to a Pro64® network by adding the ASI A-Net Systems Inetrface module.
Specifications
Audio Output |
1/4-inch TRS stereo, headphone or line level |
Line/Headphone TRS Output |
Tip: Audio Left; Ring: Audio Right;Sleeve: GroundAuto-detects mono plugs |
A-Net Input/Output |
1 A-Net input, 1 A-Net output; Category 5 (RJ45 connector) |
Digital to Analog Conversion |
24 bit |
Signal to Noise Ratio |
(Referenced to 0dB) -103dB |
Latency |
<0.880 msec (measured from analog input to analog output) |
Pro16 A-Net |
uses unshielded Cat-5e UTP (or better) cable; maximum 500ft (150m)between devices |
Tone Controls |
Treble +/-12dB at 9kHz shelvingBass +/-12dB at 160Hz shelving |
Maximum Levels (RMS) |
Line/Headphone outs: 1.0 watt at 100 ohms |
Impedance |
Line/Headphone outs: 32 ohms |
Power Supply |
External, DC, universal switching type |
Input Voltage |
100-240 volts, 50/60Hz, 30VA |
Output Voltage |
18-24 VDC, 0.5 amp |
Plug Size |
2 mm |
Dimensions |
10.75″ (273 mm) wide x 5.6″ (142.2 mm) deep;2.25″ (57.5 mm) high |
Weight |
3.4 lbs. (1.54 kg) |
Options |
MT-1 Mic Stand Mount (uses 6-32 1/4-inch screws)
|






